Kia Telluride (LQ2, 2027-2026) Owner's Manual / Driver adjustments / Instrument cluster / Warning and indicator lights / LCD Display

Subaru Forester: Warning and indicator lights / LCD Display

The high-resolution LCD display in your Kia Telluride serves as your primary hub for vehicle information, safety alerts, and system settings. You can seamlessly navigate through various display modes and configure settings using the intuitive control buttons conveniently located on your steering wheel.

LCD Display Control Overview


Switch	Control	Action
Mode (1)	Short Press	Cycle through different primary information view modes
OK (2)	Short Press	Execute commands or access additional sub-menu functions
OK (2)	Long Press	Reset current menu data or trip information
Up/Down (3) ,	Short Roll	Scroll through utility information and system menus

Indicator lights

E..

LCD Display Modes

The sophisticated Kia Telluride LCD cluster features three distinct modes, allowing you to prioritize the data most relevant to your driving style. Easily toggle between these views by pressing the Mode button...

Other information:

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Supplemental Restraint System (SRS) components and functions

The actual locations of the SRS components in the Kia Telluride may vary slightly from those shown in the illustration. The Supplemental Restraint System includes the following major components: Front impact sensors Front passenger air bag module SRS control module (SRSCM) with integrated rollover sensor Side pressure sensors Front side air bag modules Side impact sensors Curtain air bag modules Driver's knee air bag module Driver's front air bag module SRS air bag warning light Occupant Detection System (ODS) Front driver and passenger seat belt buckle sensors Front center side air bag module Seat belt retractor pretensioner assemblies Second-row side air bag module The SRSCM continuously monitors the operating status of every SRS component whenever the ENGINE START/STOP button is in the ON position and for approximately three minutes after the ignition is switched off...

Subaru Forester 2019-2026 Owners Manual: Blind Spot Detection (BSD)

Operating range The system warns the driver of dangers as follows. If the system detects a vehicle in the blind spot, the BSD/RCTA approach indicator light(s) on the outside mirror(s) will illuminate. BSD/RCTA approach indicator light If the driver operates the turn signal lever in the direction which the BSD/RCTA approach indicator light is illuminating, the corresponding BSD/RCTA approach indicator light will flash...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.