Subaru Forester: Instruments and controls / Meters and gauges

NOTE

Some of the meters and gauges on the combination meter use liquid-crystal displays. You will find their indications hard to see if you wear polarized glasses.

Hazard warning flasher

The hazard warning flasher is used to warn other drivers when you ..

Speedometer, Tachometer and Odometer

Speedometer The speedometer shows the vehicle speed. Tachometer The tachometer shows the engine speed in thousands of revolutions per minute. CAUTION Do not operate the engine with the pointer of the tachometer in the red zone...

Other information:

Subaru Forester 2019-2026 Owners Manual: Starting and stopping the engine (models without push-button start system)


CAUTION Do not operate the starter motor continuously for more than 10 seconds. If the engine fails to start after operating the starter for 5 to 10 seconds, wait for 10 seconds or more before trying again. NOTE It may be difficult to start the engine when the battery has been disconnected and reconnected (for maintenance or other purposes)...

Subaru Forester 2019-2026 Owners Manual: Type A combination meter


Various adjustments can be made, such as switching units shown on the combination meter and adjusting the warning tone volume. While the ignition switch is in the “OFF” position, each press of TRIP RESET switch results in items shown in the table below being switched...

Categories

Type B multi-function display (color LCD)

Turn the ignition switch to “ON”.

Subaru Forester. Type B multi-function display (color LCD)

Press the Subaru Forester. Type B multi-function display (color LCD) button. Select “Settings”. Select “Vehicle”. Select “Time/Date” and then select “Manual”.

Subaru Forester. Type B multi-function display (color LCD)

Set the each items plus and minus. Select Subaru Forester. Type B multi-function display (color LCD) to complete the clock setting.

read more

 
Copyright © 2026 www.suforester5.com