Kia Telluride (LQ2, 2027-2026) Owner's Manual / Driver adjustments / Steering wheel / Motor Driven Power Steering (MDPS)

Subaru Forester: Steering wheel / Motor Driven Power Steering (MDPS)

The Kia Telluride uses a Motor Driven Power Steering (MDPS) system that provides electric steering assistance to help reduce steering effort during everyday driving.

If the engine is not running or if the power steering system becomes unavailable, steering control remains possible. However, considerably more steering effort will be required.

The MDPS continuously monitors steering wheel torque and vehicle speed, automatically adjusting the level of steering assistance to suit current driving conditions.

To improve vehicle stability and steering precision, steering effort gradually increases as vehicle speed rises and becomes lighter at lower speeds, making parking and maneuvering easier.

If you notice any unusual change in steering feel, resistance, or responsiveness during normal operation, have your Kia Telluride inspected by an authorized Kia dealer as soon as possible.

TIP

The following conditions may occur during normal operation of the MDPS system:

After the ENGINE START/STOP button is switched to the ON position, the MDPS performs a self-diagnosis for approximately 3 seconds before entering normal operating mode.

You may hear a clicking sound from the MDPS relay when the ENGINE START/STOP button is turned to either the ON or OFF position. This is a normal system operation.

Some steering noise may be noticeable while turning the steering wheel with the vehicle stopped or traveling at very low speed.

If the MDPS does not operate correctly, the steering warning light may illuminate or flash on the instrument cluster. Steering assistance may be reduced, requiring additional effort to turn the wheel.

In very cold weather, steering effort may temporarily increase and additional operating noise may be heard. As system temperature rises, steering performance returns to normal.

If the charging system warning light comes on because of low system voltage or a malfunctioning alternator or battery, additional steering effort may be required.

After jump-starting the vehicle following a discharged battery, steering assistance may initially feel limited. This temporary condition is caused by low battery voltage. Once the battery has stabilized, the MDPS will return to normal operation. Before driving your Kia Telluride, gently turn the steering wheel left and right to verify proper steering assistance.

TIP

If the steering wheel is turned continuously for an extended period, the overcurrent protection function may temporarily reduce steering assistance, making the wheel feel heavier. This is a normal protective feature designed to prevent system overheating. Steering assistance will automatically return once the system has cooled.

WARNING

If the Electric Power Steering (EPS) system fails or an error occurs, the steering warning light may illuminate or flash, and steering effort may increase significantly. Maintain a firm grip on the steering wheel, safely move the vehicle to a secure location, and have your Kia Telluride inspected immediately by an authorized Kia dealer.

Steering wheel

T..

Tilt and telescopic steering wheel. Adjusting steering wheel angle and height

The tilt and telescopic steering wheel allows you to adjust both the height and the distance of the steering wheel before driving, helping you achieve a comfortable seating position while maintaining full control of the vehicle...

Other information:

Subaru Forester 2019-2026 Owners Manual: System servicing

WARNING When discarding a seatbelt retractor assembly or scrapping the entire vehicle damaged by a collision, consult your SUBARU dealer. Tampering with or disconnecting the system’s wiring could result in accidental activation of the seatbelt pretensioner and/or SRS airbag or could make the system inoperative, which may result in serious injury...

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Pretensioner seat belt

Your Kia Telluride is equipped with pretensioner seat belts for the driver, front passenger, and occupants in the second and third seating rows. The pretensioner system is designed to reduce slack in the seat belt during certain types of collisions, allowing the belt to fit more securely against the occupant's body and improving the effectiveness of the restraint system...