Subaru Forester: Driver Monitoring System settings / Restoring the screen
When the INFO button is operated after
the ignition switch is turned to the “ON” or
“ACC” position, the screen will be restored.
The screen will be restored with the basic
screen that was displayed when the
screen was turned off.
NOTE
While the screen is off, the screen
switches to the climate control screen
only when the climate control system is
operated.
Select “Favorite” from the 2nd menu in
setting screen. Refer to “Setting screen”.
Set the desired items by using the
control switches...
Other information:
Airflow mode selection dial (Refer to
“Airflow mode selection”)
Fan speed control dial (Refer to “Fan
speed control”)
Temperature control dial (Refer to “Temperature
control”)
Air conditioner button (Refer to “Air
conditioner control”)
Air inlet selection button (Refer to “Air
inlet selection”)
Rear window defogger button and outside
mirror defogger button (if equipped)
(Refer to “Defogger and deicer”)
NOTE
The controllable temperature range
may vary depending on the regional
specifications of the vehicle...
Two separate circuits
Your vehicle has two separate circuit brake
systems. Each circuit works diagonally
across the vehicle. If one circuit of the
brake system should fail, the other half of
the system still works. If one circuit fails,
the brake pedal will go down much closer
to the floor than usual and you will need to
press it down much harder...