Subaru Forester: Instruments and controls / Setting screen
Press and hold the INFO button on the guidance screen. The top menu is displayed.
Operate the “
” or “.gif)
”
switch to
select the preferred menu from the top
menu.
Pull the “
” switch to enter the
selected menu.
Operate the “
” or “”
switch to
select the preferred menu from the 2nd
menu.
Pull the “
” switch to enter the
selected menu.
The menu lists are as follows.
Items that can be set when stopped:
*: You can also set this while driving.
Items that can be set while driving:
For safety reasons, we recommend stopping the vehicle in a safe location while setting.
- Date and time settings
- Driver Monitoring System settings
- Climate Control settings
- Maintenance settings
- Initialize
- How to get the source code using the open source
Date and time settings
You can set the date, time and 12h or 24h
format settings.
Current date and time setting
For details about clock setting, refer to
“Clock”.
Birthday setting
If a birthday or anniversary is approaching,
a message will be displayed when the
ignition switch is turned to the “ON”
position...
Other information:
Subaru Forester 2019-2026 Owners Manual: CHECK ENGINE warning light/Malfunction indicator light
CAUTION If the CHECK ENGINE warning light/ Malfunction indicator light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious damage, which may not be covered by your vehicle’s warranty...
Subaru Forester 2019-2026 Owners Manual: Windshield wiper blade rubber
Replace the wiper blade rubber according to the following procedure. Slit Pull the wiper blade rubber from the right side in the order of (1), (2) and (3) until the slit on the wiper blade can be seen position. Pull the end of the wiper blade rubber through the slit to remove it...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Disabling functions
- How to use the high beam assist function
- All-Wheel Drive warning light
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
