Subaru Forester 2019-2026 Owners Manual / Instruments and controls / Setting screen / Driver Monitoring System settings

Subaru Forester: Setting screen / Driver Monitoring System settings

You can set the Driver Monitoring System settings.

Repeat facial scan

Select “Repeat facial scan” from the 2nd menu in the settings screen. Refer to “Setting screen”. Select “Yes” to start the repeat facial scan...

Other information:

Subaru Forester 2019-2026 Owners Manual: BSD/RCTA OFF switch

BSD/RCTA OFF switch BSD/RCTA OFF indicator light If the BSD/RCTA OFF switch is pressed, the BSD/RCTA OFF indicator light appears on the combination meter, and the BSD/RCTA is deactivated. Press the switch again to activate the BSD/ RCTA. The BSD/RCTA OFF indicator light will disappear...

Subaru Forester 2019-2026 Owners Manual: Type A combination meter

Various adjustments can be made, such as switching units shown on the combination meter and adjusting the warning tone volume. While the ignition switch is in the “OFF” position, each press of TRIP RESET switch results in items shown in the table below being switched...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.