Subaru Forester: Warning and indicator / SRS airbag system warning light
WARNING
If the warning light exhibits any of the following conditions, there may be a malfunction in the seatbelt pretensioners and/or SRS airbag system. Immediately take your vehicle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatbelt pretensioners and/or SRS airbag will not operate properly in the event of a collision, which may increase the risk of injury.
- Flashing or flickering of the warning light
- No illumination of the warning light when the ignition switch is first turned to the “ON” position
- Continuous illumination of the warning light
- Illumination of the warning light while driving
For details about the components monitored by the warning light, refer to “SRS airbag system monitors”.
Front passenger’s frontal airbag ON and OFF indicator lights
: Front passenger’s frontal
airbag ON
indicator lights
: Front passenger’s frontal
airbag OFF
indicator lights
The front passenger’s frontal airbag ON
and OFF indicators show you the status of
the front passenger’s SRS frontal airbag...
Other information:
Subaru Forester 2019-2023 Owners Manual: Multi-function display (color LCD)
NOTE For models with multi-function display (black and white), refer to “Multi-function display (black and white)”. WARNING Always pay adequate attention to safe driving when operating the multi-function display (color LCD) while the vehicle is in motion...
Subaru Forester 2019-2023 Owners Manual: Ignition switch (models without “keyless access with push-button start system”)
WARNING Never turn the ignition switch to the “LOCK” position while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- All-Wheel Drive warning light
- Disabling functions
- How to use the high beam assist function
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
