Subaru Forester: Warning and indicator / Turn signal indicator lights

These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs”.
Type A
Upshift indicator
Downshift indicator
Select lever/gear position indicator
Type B
Upshift indicator
Downshift indicator
Select lever/gear position indicator
This indicator shows the position of the
select lever.
For models with manual mode, when the
manual mode is selected, the ..
High beam indicator light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated...
Other information:
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the position. The washer
fluid sprays until you release the knob.
To wash the rear window when the rear
wiper is not in use, turn the knob switch
downward to the position...
Park the vehicle on a level surface and
turn the ignition switch to the “LOCK”/
“OFF” position. If you check the oil level
just after turning the ignition switch to the
“LOCK”/“OFF” position, wait for at least 5
minutes for the oil to drain back into the oil
pan before checking the level...