Subaru Forester 2019-2026 Owners Manual / Driving tips / Trailer towing / When you do not tow a trailer
Subaru Forester: Trailer towing / When you do not tow a trailer
CAUTION
- The housing should be kept dirt and corrosion-free at the points of contact. The surfaces only require cleaning with a cloth. Grease or other lubricants should never be used.
- If the ball is not installed, the plastic insert should then be inserted for protection and to prevent it from getting dirty. When the ball is not used, place the ball cap and store securely.
Trailer Hitches
W..
Other information:
Subaru Forester 2019-2026 Owners Manual: Multi-function display (black and white)
NOTE For models with multi-function display (color LCD), refer to “Multi-function display (color LCD)”. Outside temperature indicator X-MODE indicator (if equipped) Driving information display Clock With the ignition switch in the “ACC” position, the clock appears on the display...
Subaru Forester 2019-2026 Owners Manual: Hill descent control function
The hill descent control function will be in standby mode when the X-MODE is activated and the vehicle speed is less than approximately 12 mph (20 km/h). The function will operate when the vehicle speed is less than approximately 12 mph (20 km/h) and the accelerator ratio is less than approximately 10%...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Automatic door locking/unlocking
- RAB warning light (if equipped)
- Daytime running light system
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
Copyright © 2026 www.suforester5.com