Subaru Forester: Multi-function display (black and white) / X-MODE indicator (if equipped) / Clock
X-MODE indicator

This indicator will be shown while the XMODE
is activated. It will turn off when the
X-MODE is deactivated.
Clock
For details about clock setting, refer to
“Clock”.
NOTE
For models with multi-function display
(black and white), refer to “Multi-function
display (black and white)”.
WARNING
Always pay adequate attention to
safe driving when operating the
multi-function display (color LCD)
while the vehicle is in motion...
Other information:
Select the airflow mode using the airflow
mode selection dial (type A and C) or the
airflow mode selection button (type B).
Airflow modes are as follows.
If equipped
Ventilation: Instrument panel outlets
If equipped
Ventilation 2 for type B and C: Instrument
panel outlets and foot outlets
If equipped
Bi-level: Instrument panel outlets and foot outlets
If equipped
Heat: Foot outlets, both side outlets of the
instrument panel and some through windshield
defroster outlets (A small amount of
air flows to the windshield and both side
windows to prevent fogging...
Select the blank space in the menu to exit
the driving information display selection.
NOTE
The average fuel consumption and
average vehicle speed are calculated
even while the driving information display
is not displayed.
Even if you turn off the driving
information display, the display will
automatically turn on when the battery
voltage is disconnected and then reconnected
for battery replacement or
fuse replacement...