Subaru Forester: Opening and closing / Hood

The hood provides access to the Kia Telluride engine compartment for routine inspections, fluid level checks, and scheduled maintenance.

Open the hood whenever engine compartment inspection or service work is required, and always make sure it is securely closed before driving.

Opening the hood

  1. Pull the interior hood release lever. The hood will release from the primary latch and raise slightly.
    Kia Telluride interior hood release lever location
  2. Move to the front of the vehicle, lift the hood slightly, push the secondary hood release lever (1) to the left, and continue raising the hood.
    Kia Telluride secondary hood safety latch operation
  3. Raise the unlocked hood fully until it remains securely in the open position.
    Kia Telluride hood fully opened for engine compartment access

Hood open warning

If the hood is not fully closed, the Kia Telluride displays a hood open warning message on the instrument cluster LCD display to alert the driver.

Kia Telluride hood open warning displayed on instrument cluster

If you begin driving with the hood unlatched, a warning chime will sound once the vehicle reaches approximately 2 mph (3 km/h). Stop as soon as it is safe to do so and verify that the hood is completely closed and securely latched before continuing your drive.

Closing the hood

Kia Telluride properly closing and latching the hood
  1. Before closing the hood, carefully inspect the engine compartment and verify the following:
    • All engine oil, coolant, brake fluid, washer fluid, and other filler caps are securely installed in their proper locations.

    • Gloves, cleaning cloths, tools, and any combustible or loose materials have been removed from the engine compartment.

  2. Lower the hood until it is about halfway closed, then allow it to drop naturally so it latches securely. Avoid pressing down on the hood with excessive force.
  3. Confirm that the hood is fully locked.

    If the hood can still be lifted slightly after closing, it has not engaged correctly. Open it again and repeat the closing procedure using slightly more force until it latches securely.

    WARNING

    Hood obstruction

    Before closing the hood, always make sure there are no tools, hands, clothing, or other objects within the hood opening. Closing the hood while an obstruction is present can result in serious personal injury or damage to the Kia Telluride.

    WARNING

    Fire risk

    Never leave gloves, rags, paper products, or other flammable materials inside the engine compartment. Engine heat may ignite these materials and create a fire hazard.

    WARNING

    Unsecured hood

    Always verify that the hood is completely latched before driving. An improperly secured hood could suddenly open while the vehicle is moving, blocking the driver's view and significantly increasing the risk of a collision.

    Power window lock button

    T..

    Sunroof : (if equipped)

    If equipped, the Kia Telluride sunroof allows additional ventilation and natural light by providing both sliding and tilting functions...

    Other information:

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Brake fluid. Checking the brake fluid level


    Checking the brake fluid level Inspect the hydraulic brake fluid level in the master cylinder reservoir regularly. The fluid line should sit consistently between the clearly marked MAX and MIN indicators on the exterior wall of the reservoir. To protect the sensitive hydraulic circuit against abrasive dirt and moisture contamination, clean the exterior cap and surrounding plastic surfaces thoroughly before opening the reservoir to add brake fluid...

    Subaru Forester 2019-2026 Owners Manual: Interior


    Passenger compartment area Lower anchorages for child restraint system Seatbelts Front seats Rear seats Power window switches Door locks Select lever USB power supply Front power supply socket Glove box Cup holder Center console Button for SUBARU STARLINK Moonroof switch Electronic parking brake switch Auto Vehicle Hold switch X-MODE switch Front seat heater switches USB power supply Rear seat heater switches NOTE F o r m o d e l s w i t h S U B A R U STARLINK: Refer to the Owner’s Manu a l s u p p l e m e n t f o r S U B A R U STARLINK...

    Categories

    How to get the source code using the open source

    Free/Open Source Software Information

    This product contains Free/Open Source Software (FOSS).

    The license information and/or the source code of such FOSS can be found at the following URL.

    http://www.globaldenso.com/en/opensource/ivi/subaru/

    read more

     
    Copyright © 2026 www.suforester5.com