Subaru Forester: Ignition switch (models without “keyless access with push-button start
system”) / Ignition switch light (if equipped)
For easy access to the ignition switch in
the dark, the ignition switch light illuminates
when the driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for several
tens of seconds and then gradually turns
off under the following conditions.
- The driver’s door is closed.
- The doors are unlocked using the
remote keyless entry transmitter.
The light turns off immediately under the
following conditions.
- The ignition switch is turned to the “ON”
position.
- All doors and the rear gate are locked
using the remote keyless entry transmitter.
Other information:
Rear tie-down hole
The rear tie-down holes are located near
each of the jack-up reinforcements.
There is a plug in each rear tie-down hole.
To use the rear tie-down holes, remove the plugs. After using the rear tie-down
holes,
return the plugs to their original places...
Type A SI-DRIVE switches
Type B SI-DRIVE switches
To select the Intelligent (I) mode, press
the “I” switch.
To select the Sport (S) mode, press the
“S” switch.
To select the Sport Sharp (S#) mode,
press the “S#” switch.
NOTE
While the engine is cool, you cannot
change to Sport Sharp (S#) mode...