Subaru Forester: Rear View Monitor (RVM): (if equipped) / Rear View Monitor malfunction and limitations
Rear View Monitor malfunction
If Rear View Monitor malfunctions, the image on the display may appear green, blue, black, distorted, or otherwise abnormal.
Visit an authorized Kia dealer if the Rear View Monitor does not operate correctly, if the screen flickers, or if the camera image is not displayed clearly.
Limitations of Rear View Monitor
If the vehicle remains stopped for an extended time in winter or is parked inside an enclosed parking area, exhaust fumes may temporarily blur the camera image.
The Rear View Monitor image may appear abnormal under the following circumstance:
-
When the liftgate is open.
WARNING
-
The Wide Rear View camera does not show the entire area behind the vehicle. Always check behind the Kia Telluride directly and use the inside and outside rearview mirrors before parking or reversing.
-
The distance shown on the Rear View Monitor may differ from the actual distance because of camera image calibration. If the vehicle is tilted due to cargo loading, Rear Parking Guidelines may not be accurate. Always confirm the surroundings visually before moving.
-
Keep the wide rear view camera lens clean to maintain clear image quality and proper Rear View Monitor operation. Do not clean the lens with chemical solvents, strong detergents, highly alkaline cleaners, gasoline, acetone, or other volatile organic solvents that may damage the camera.
-
Driving with the liftgate open is not normal driving operation. For safety, remain alert and drive carefully if this condition occurs.
Surround View Monitor (SVM): (if equipped)
Surround View Monitor (SVM) helps with parking by showing views around the Kia Telluride, making it easier to understand the vehicle’s position in relation to nearby objects and parking boundaries...
Other information:
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Junction Turning function
The Junction Turning function of Forward Collision-Avoidance Assist is designed to support the driver when turning across oncoming traffic. In the Kia Telluride, this function may operate through the following stages: Collision Warning Emergency Braking Stopping vehicle and ending brake control Collision Warning Collision Warning Collision Warning can alert the driver with a blinking Forward Safety warning light (), a warning message on the instrument cluster, an audible warning, and steering wheel vibration...
Kia Telluride (LQ2, 2027-2026) Owner's Manual: Reporting Safety Defects (U.S. only)
If you ever reasonably believe that your Kia Telluride has a structural or mechanical defect which could cause a sudden crash, severe physical injury, or potential fatality, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to promptly notifying Kia America, Inc...
Categories
- Manuals Home
- Replacing battery of access key fob
- Low fuel warning light
- Reverse Automatic Braking (RAB) system ON/OFF setting
- New on site
- Most important about car
How to get the source code using the open source
Free/Open Source Software Information
This product contains Free/Open Source Software (FOSS).
The license information and/or the source code of such FOSS can be found at the following URL.
http://www.globaldenso.com/en/opensource/ivi/subaru/
