Subaru Forester: Driver assistance guide / Rear View Monitor (RVM): (if equipped)
The Rear View Monitor (RVM) provides a live image of the area behind your Kia Telluride, helping improve visibility during reversing and parking maneuvers. The system is intended to supplement careful observation of the surroundings and does not replace safe driving practices.
Detection sensor
Please refer to Detecting sensor(s) for the applicable sensors and their locations.
NOTE
The rear wide-angle camera includes a washer function that can spray washer fluid onto the camera lens to help remove dirt, dust, water droplets, and other contaminants that may affect image quality.
Refer to Camera cleaning system.
Warning Methods
Driver Assistance
Warning Methods
To adjust the Warning Methods while the vehicle is ON, select Setup >
Vehicle > Driver Assistance > Warning
..
Other information:
Park the vehicle on a level surface and
turn the ignition switch to the “LOCK”/
“OFF” position. If you check the oil level
just after turning the ignition switch to the
“LOCK”/“OFF” position, wait for at least 5
minutes for the oil to drain back into the oil
pan before checking the level...
So that it can be used safely and comfortably,
the Auto Start Stop system is
designed to constantly monitor the vehicle
conditions as well as the environment
inside and outside the vehicle in addition
to driver operations, and to provide various
warnings to the driver via the warning light
and/or indicator light illuminating or flashing
and a buzzer sounding...