Kia Telluride (LQ2, 2027-2026) Owner's Manual / Driver assistance guide / Forward Collision-avoidance Assist (FCA) (Sensor Fusion) / Forward Collision-avoidance Assist operation / Junction Turning function

Subaru Forester: Forward Collision-avoidance Assist operation / Junction Turning function

The Junction Turning function of Forward Collision-Avoidance Assist is designed to support the driver when turning across oncoming traffic. In the Kia Telluride, this function may operate through the following stages:

Collision Warning
Emergency Braking
Stopping vehicle and ending brake control

Collision Warning


	Collision Warning

Collision Warning can alert the driver with a blinking Forward Safety warning light (), a warning message on the instrument cluster, an audible warning, and steering wheel vibration.

Collision Warning may activate under the following conditions:

Your driving speed is approximately 6-19 mph (10-30 km/h).
The oncoming vehicle speed is approximately 19-44 mph (30-70 km/h).
The motorcyclist or cyclist speed is approximately 9-44 mph (15-70 km/h).
When the detected object enters the operating range of the Junction Turning function.

Emergency Braking


	Emergency Braking

Emergency Braking can warn the driver with the blinking Forward Safety warning light (), a warning message, an audible alert, and steering wheel vibration. If the system determines that a collision with an oncoming vehicle, motorcyclist, or cyclist may occur while turning, it may apply braking assistance to help avoid the impact or reduce its severity.

Emergency Braking may activate under the following conditions:

Your driving speed is approximately 6-19 mph (10-30 km/h).
The oncoming vehicle speed is approximately 19-44 mph (30-70 km/h).
The motorcyclist or cyclist speed is approximately 9-44 mph (15-70 km/h).
When the detected object enters the operating range of the Junction Turning function.

Stopping vehicle and ending brake control


	Drive carefully

When Emergency Braking brings your vehicle to a stop, a warning message appears on the instrument cluster.

For safety, immediately press the brake pedal and check the area around the Kia Telluride before continuing.

Brake control ends approximately 2 seconds after Emergency Braking stops the vehicle.

TIP

Press the hazard warning light button to turn the warning sound OFF during Collision Warning and Emergency Braking.

TIP

When turning right at an intersection, braking assistance may activate if the system detects a collision risk with a cyclist approaching from the opposite side at approximately 9-12 mph (15-20 km/h).

Basic function

T..

Direct Oncoming function

The Direct Oncoming function of Forward Collision-Avoidance Assist helps monitor vehicles approaching from the opposite direction. In the Kia Telluride, this function may respond through the following operating stages: Collision Warning Emergency Braking Stopping vehicle an..

Other information:

Subaru Forester 2019-2026 Owners Manual: X-MODE (if equipped)

WARNING Always use the utmost care in driving – overconfidence because you are driving a vehicle with X-MODE could easily lead to a serious accident. Always use the utmost care in driving – overconfidence because you are driving a vehicle with hill descent control function (if equipped) could easily lead to a serious accident...

Kia Telluride (LQ2, 2027-2026) Owner's Manual: Battery saver function

This feature is designed to protect the vehicle battery from excessive discharge if the exterior lights are accidentally left on. Once the engine is turned off and the driver's door is opened, the system automatically switches off the position lamps. However, if you operate the lighting switch after the vehicle has been turned off, the position lamps will remain illuminated even with the driver's door open...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.