Subaru Forester: Automatic climate control system / Scheduled ventilation control

Scheduled Ventilation helps reduce the temperature inside the Kia Telluride by expelling hot air from the cabin before you enter the vehicle.

Depending on the outside temperature, the blower fan operates for approximately 5 to 15 minutes while the vehicle remains parked.

Select Settings > Vehicle > Climate > Automatic Ventilation > Scheduled Ventilation on the infotainment system screen to enable or disable this feature.

The ventilation start time can be scheduled up to 24 hours in advance. Scheduled Ventilation operates only after a departure time has been configured.

    Air conditioning (A/C) automatic drying

    T..

    Recirculate air: (if equipped)

    This feature automatically switches the Kia Telluride climate control system to recirculated air mode based on navigation information and vehicle speed...

    Other information:

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Emergency starting


    When the engine fails to crank due to insufficient 12V battery voltage or a discharged battery condition, emergency jump starting using external booster cables or a portable power pack may be required to start your Kia Telluride. Jump starting To safely jump-start a discharged battery, connect booster cables precisely in the numbered numerical sequence illustrated below, and ensure you disconnect them in exact reverse order upon completion: (+) Positive terminal connection on the operational booster battery source (-) Negative terminal connection on the operational booster battery source (+) Positive terminal connection on the discharged Kia Telluride battery (-) Ground connection point on a solid metallic engine surface away from the discharged battery Jump starting a vehicle carries inherent hazards if handled improperly...

    Kia Telluride (LQ2, 2027-2026) Owner's Manual: Blind-spot Collision-avoidance Assist (BCA)


    When driving above a certain speed, Blind-spot Collision-avoidance Assist can monitor the rear-side warning area. If the system detects a vehicle in the blind spot and determines that a collision risk exists, it warns the driver with a warning light and an audible alert...

    Categories

    Driving information display

    NOTE

    You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.

    read more

     
    Copyright © 2026 www.suforester5.com