On Kia Telluride models equipped with a smart key, the Smart Liftgate with AUTO Open function provides convenient hands-free access to the cargo area. When the system detects the authorized smart key near the rear of the vehicle, it can automatically open the liftgate without requiring you to press any buttons.
|
The Kia Telluride Smart Liftgate with AUTO Open allows you to access the cargo area without pressing any buttons. When the required operating conditions are met and you carry a recognized smart key, the system automatically detects your presence and opens the liftgate for added convenience.
The hands-free liftgate function operates under the following conditions:
At least 15 seconds have passed after all doors have been completely closed and locked.
You remain within the detection area for more than 3 seconds while carrying the registered smart key.
TIP
The Smart Liftgate with AUTO Open on the Kia Telluride will not operate under the following conditions:
The smart key is detected continuously during the first 15 seconds after all doors have been locked.
The smart key remains within 60 in (1.5 m) of the front door handles during the first 15 seconds after locking (vehicles equipped with Welcome Light).
Any door is not fully closed or remains unlocked.
The smart key has been left inside the vehicle.
To enable the Kia Telluride Smart Liftgate with AUTO Open, navigate to Setup > Vehicle > Door > Smart Liftgate within the infotainment system and activate the feature.
|
When you stand within the detection zone, approximately 20–40 in (50–100 cm) behind the Kia Telluride while carrying the smart key, the system recognizes the key. The hazard warning lamps flash and a chime sounds to notify you that the vehicle has detected your presence. The liftgate will then begin its automatic opening sequence.
TIP
If you do not intend to open the liftgate, avoid entering the detection area. If the warning lamps begin flashing and the chime sounds unintentionally, simply move away from the rear of the vehicle with the smart key. The liftgate will remain closed and the operation will be canceled.
|
After detection is confirmed, the hazard warning lights flash and the warning chime sounds six times before the liftgate automatically opens.
WARNING
Before driving your Kia Telluride, always confirm that the liftgate is completely closed and securely latched.
Check that no people, pets, or nearby objects are within the liftgate's operating path before automatic opening or closing begins.
When parked on an incline, ensure that loose cargo cannot slide out as the liftgate opens, since this could result in injury or property damage.
Disable the Smart Liftgate with AUTO Open before using an automatic car wash to prevent unintended liftgate operation.
Keep the smart key away from children. Accidental activation near the rear of the vehicle could cause the liftgate to open unexpectedly.
NOTE
Liftgate gas lifters
Always close the liftgate completely before driving. Operating the vehicle with the liftgate open or partially latched may damage the liftgate gas struts and related hardware.
|
|
If you press any button on the smart key while the system is in the Detect and Alert stage, the Kia Telluride Smart Liftgate with AUTO Open function will be canceled for that operating cycle.
Become familiar with this deactivation method so you can quickly stop automatic liftgate operation whenever necessary.
TIP
If you press the door unlock button (2), the Smart Liftgate with AUTO Open feature is temporarily disabled. However, if no door is opened within 30 seconds, the feature automatically becomes active again.
Pressing and holding the liftgate open button (3) for more than one second will unlock and open the liftgate directly.
If you press the door lock button (1) or the liftgate button (3) while the system is not in the Detect and Alert stage, the Smart Liftgate with AUTO Open function will continue operating normally and will not be deactivated.
If you disable the Smart Liftgate with AUTO Open using the smart key and then open a door, the function will automatically reactivate once all doors are closed and locked again.
|
The Smart Liftgate with AUTO Open function activates its welcome alert when the smart key is detected approximately 20–40 in (50–100 cm) behind the Kia Telluride liftgate.
The alert stops immediately if the smart key is moved outside the detection area during the Detect and Alert stage.
TIP
The Smart Liftgate with Auto Open function may not operate correctly under the following conditions:
The smart key is close to a strong radio transmitter, such as a broadcasting station or airport equipment, which may interfere with normal transmitter operation.
The smart key is located near a mobile two-way radio system or a mobile phone.
Another vehicle’s smart key is being used close to your Kia Telluride.
The detection range may become shorter or longer under the following conditions:
One side of the vehicle is raised for tire replacement, inspection, or service work.
The vehicle is parked on an incline, slope, uneven surface, unpaved road, or similar area.
|
|
To manually unlock and open the liftgate from inside the luggage compartment, follow this procedure:
WARNING
For emergency situations, make sure you know where the emergency liftgate safety release latch is located in your Kia Telluride and understand how to use it if someone is accidentally locked in the luggage compartment.
No person or animal should ever remain in the luggage compartment. This area is not designed for occupants and can be extremely dangerous during a collision or sudden stop.
Use the release latch only in emergencies. Exercise extreme caution, especially if the vehicle is moving or stopped in an unsafe location.
Windows
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.