Subaru Forester: Consumer information and reporting safety defects / Uniform tire quality grading standards

This information indicates the relative performance of passenger car tires in the area of treadwear, traction, and temperature resistance. This is to aid the consumer in making an informed choice in the purchase of tires. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.

For example:

TREADWEAR 200 TRACTION AA TEMPERATURE A

The quality grades apply to new pneumatic tires for use on passenger cars. However, they do not apply to deep tread, winter type snow tires, space-saver or temporary use spare tires, tires with nominal rim diameters of 12 inches or less, or to some limited production tires.

All passenger car tires must conform to Federal Safety Requirements in addition to these grades.

Vehicle load limit – how to determine

The load capacity of your vehicle is determined by weight, not by a..

TREADWEAR

The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course...

Other information:

Subaru Forester 2019-2022 Owners Manual: Center seating position


CAUTION The head restraint is not intended to be used in the retracted position. Before sitting in the seat, raise the head restraint to the extended position. When not used (retracted position) When used (extended position) Head restraint Release button To raise: Pull the head restraint up...

Subaru Forester 2019-2022 Owners Manual: Coolant temperature low indicator light/Coolant temperature high warning light


CAUTION After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves in any of the following ways, the electrical system may be malfunctioning. Contact your SUBARU dealer immediately for an inspection...

Categories

Type B multi-function display (color LCD)

Turn the ignition switch to “ON”.

Subaru Forester. Type B multi-function display (color LCD)

Press the Subaru Forester. Type B multi-function display (color LCD) button. Select “Settings”. Select “Vehicle”. Select “Time/Date” and then select “Manual”.

Subaru Forester. Type B multi-function display (color LCD)

Set the each items plus and minus. Select Subaru Forester. Type B multi-function display (color LCD) to complete the clock setting.

read more

 
Copyright © 2022 www.suforester5.com