Subaru Forester: Seat / Manual seat (if equipped)
Pull the lever upward and slide the seat to
the desired position. Then release the
lever and move the seat back and forth to
make sure that it is securely locked into
place...
Other information:
Perform the following procedure to release
the shift lock.
Apply the parking brake and stop the
engine.
Wrap the tip of a flat-head screwdriver
with vinyl tape or a cloth and use it to
remove the shift lock cover. The shift lock
release button is located under the shift
lock cover...
Select the airflow mode using the airflow
mode selection dial (type A and C) or the
airflow mode selection button (type B).
Airflow modes are as follows.
If equipped
Ventilation: Instrument panel outlets
If equipped
Ventilation 2 for type B and C: Instrument
panel outlets and foot outlets
If equipped
Bi-level: Instrument panel outlets and foot outlets
If equipped
Heat: Foot outlets, both side outlets of the
instrument panel and some through windshield
defroster outlets (A small amount of
air flows to the windshield and both side
windows to prevent fogging...
Categories
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following conditions.
While parking or driving at low
speeds
When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
When starting the engine after
being parked for a certain period of
time
The temperature unit cannot be
changed.
read more