Subaru Forester: Basic screens / Prevention safety screen

- Telltale screen
- Steering angle
- Vehicle posture
- Running condition

X-MODE screen
- Vehicle posture
- X-MODE
This screen displays the driving status of
the vehicle and the operation status functions.
For functions that are operating, the
indicator will illuminate or flash.
NOTE
- The vehicle posture indication may
differ from the actual vehicle posture.
- When X-MODE has turned on, the
screen of the multi-function display is
switched to the prevention safety
screen.
- The vehicle posture angle varies not
only due to the angle of the road
surface, but also due to the vehicle tilt
caused by the occupants, cargo, and acceleration or deceleration.
Lead vehicle indicator
Your own vehicle indicator
Stop lights
Road line indicator
Lane indicator
Lane Centering indicator
Steering wheel indicator
This screen displays the status of the
EyeSight system...
Other information:
For easy access to the ignition switch in
the dark, the ignition switch light illuminates
when the driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for several
tens of seconds and then gradually turns
off under the following conditions...
Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
Set the preferred temperature using
the temperature control dial.
NOTE
If you operate any of the buttons on the
control panel other than the ON/OFF
button, the rear window defogger button,
the SYNC button (if equipped) and
the temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the control
panel will turn off and the “AUTO”
indicator light will remain illuminated...