Subaru Forester: Cargo area cover (if equipped) / Stowage of the cargo area cover
The cargo area cover can be stowed in
under the cargo floor.

- Pull the strap to open the center part of
the cargo floor lid, and then remove the lid.
- Remove the left and right parts of the
cargo floor lid.

- Stow the cover housing in the cargo
area end.
To remove the front cover
Push the front cover to the right side
and shorten the bar.
Remove the front cover.
To remove the cover housing
Rewind the cover.
Push the cover housing to the right
side and shorten it.
Take it off the retainer.
..
Insert the protrusion located on the
right end of the sleeve into the recess of
the retainer.
Push the cover housing to the right
side and shorten the bar...
Other information:
In the event that you cannot open the rear
gate by operating the rear gate opener
button, you can open it from inside the
cargo area.
Remove the access cover at the
bottom-center of the rear gate trim using
a flat-head screwdriver wrapped with vinyl
tape or a cloth...
To clean the seatbelts, use a mild soap and
lukewarm water. Never bleach or dye the
belts because this could seriously affect
their strength.
Inspect the seatbelts and attachments
including the webbing and all hardware
periodically for cracks, cuts, gashes, tears,
damage, loose bolts or worn areas...