Subaru Forester: Auto-dimming mirror/compass with HomeLink® (if equipped) / To Operate the Auto-Dimming Feature
Press the
switch to turn the
autodimming
feature on/off. The auto-dimming
feature is enabled when the switch’s green
LED indicator is on. The auto-dimming
feature will default to on with each ignition
cycle.
Display
HomeLink Buttons
Switch
During nighttime driving, the auto-dimming
feature senses distracting glare from
vehicle headlights behind you and automatically
dims to eliminate the glare and
preserve your vision...
To turn the compass feature on/off,
press and hold the switch for
more
than 3 seconds or until the display turns
on/off. The compass feature will default to
on with each ignition cycle...
Other information:
The temperature grades are A (the
highest), B, and C, representing the
tire’s resistance to the generation of
heat and its ability to dissipate heat
when tested under controlled conditions
on a specified indoor laboratory
test wheel.
Sustained high temperature can
cause the material of the tire to
degenerate and reduce tire life, and
excessive temperature can lead to
sudden tire failure...
This indicator illuminates when the Driver
Monitoring System is temporarily stopped.
Refer to “Driver Monitoring System temporary
stop indicator light”.
NOTE
The Driver Monitoring System stops
temporarily when the temperature of
the Driver Monitoring System unit is
high...