Subaru Forester 2019-2025 Owners Manual / Starting and operating / Remote engine start system (dealer option) / Remote engine starter transceiver (fob) / Remote start operation - fob confirmation
Subaru Forester: Remote engine starter transceiver (fob) / Remote start operation - fob confirmation
Your remote engine starter fob is a bidirectional transceiver that can confirm system operation with several different visual and audible indications. The fob’s LED-backlit button and internal piezo buzzer will indicate status of the system using the following flash and beep sequences, provided the fob is within operational range of the system.
Alternate operation method for models with “keyless access with push-button
start system”
Access key fob
Lock button
An access key fob can be used as the
remote engine start transmitter. Operate
the lock button to start or stop the engine
as follows...
Other information:
Subaru Forester 2019-2025 Owners Manual: Ignition switch light (if equipped)
For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry transmitter. The light remains illuminated for several tens of seconds and then gradually turns off under the following conditions...
Subaru Forester 2019-2025 Owners Manual: Obstacle detected and alert level
Long proximity alert (object detected) Green: 35 in (90 cm) or more Medium proximity alert (approaching the object) Yellow: 28 to 35 in (70 to 90 cm) Short proximity alert (approaching the object closer) Orange: 20 to 28 in (50 to 70 cm) Closest proximity alert (too close to the object) Red: 20 in (50 cm) or less When an object is detected in the reversing direction, the range of detected object will be shown on the audio/navigation monitor...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- Reverse Automatic Braking (RAB) system ON/OFF setting
- Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)
- Vehicle load limit – how to determine
- New on site
- Most important about car
Outside temperature indicator
The outside temperature is displayed on the multi-function display (color LCD).
NOTE
The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.
Copyright © 2025 www.suforester5.com