Subaru Forester 2019-2026 Owners Manual / Instruments and controls / Mirrors / Using HomeLink

Subaru Forester: Mirrors / Using HomeLink

To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device (i.e. garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.). For convenience, the handheld remote of the device may also be used at any time.

Gate Operator/Canadian Programming

C..

Erasing HomeLink Buttons

To erase programming from the three buttons (individual buttons cannot be erased but can be “reprogrammed” as outlined below), follow the step noted: Press and hold the two outer HomeLink buttons for at least 10 seconds...

Other information:

Subaru Forester 2019-2026 Owners Manual: To install the cover housing

Insert the protrusion located on the right end of the sleeve into the recess of the retainer. Push the cover housing to the right side and shorten the bar. Insert the other protrusion into the recess of the other retainer...

Subaru Forester 2019-2026 Owners Manual: When the vehicle is parked on level ground

Roof rails Roof crossbars Roof tent Occupants in the roof tent The total weight on the roof rails – including the roof crossbars, roof tent, and all occupants and contents in the roof tent – must not exceed either the vehicle’s roof rail load limit (700 lbs (317 kg)), evenly distributed, or the load limit of the roof crossbars, whichever is lower...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.